Contact us if you have any questions or would like to place an order.
N-Abler II Heavy Duty Compression Spring
ITEM CODE: TD-0N2HDCS01-0N2
Author: mpatterson
Contact us if you have any questions or would like to place an order.
N-Abler II Cable Stay
ITEM CODE: TDCS-0N2
Contact us if you have any questions or would like to place an order.
USMC QD Insert
ITEM CODE: 61860
Contact us if you have any questions or would like to place an order.
Hosmer QD Insert
ITEM CODE: 51052
Contact us if you have any questions or would like to place an order.
Nudge Switch Kit
ITEM CODE: NSK01-0N2
Contact us if you have any questions or would like to place an order.
Trans-Carpal Quick Disconnect Adapter
ITEM CODE: TCQDA01-0N2
The TAD Trans-Carpal Quick Disconnect Adapter is designed to be laminated into the palm area of a custom W.H.O. leaving the Colette exposed. The adapter is bendable for custom shaping. Our Quick Disconnect Wrist Unit is then attached to the Trans-Carpal Quick Disconnect Adapter Colette. After proper Wrist orientation is achieved, the Wrist and Colette should be pined with a 1/8” V ¾” SS Roll Pin. This system is designed to accommodate persons with hand dysfunction or partial hand amputation
Specifications
Material: 2024 Aluminum. 316 Stainless Colette screw.
Weight: 19 Grams
Length: 4”
Width: 1 1/8” in th middle tapering to 15/16” on both ends.
Coette Length: 5/8”
Colette Width: 9/16”
Attach Site: Custom Lamination for persons with hand dysfunction or partial
hand amputation.
Contact us if you have any questions or would like to place an order.
Custom Quick Disconnect Insert /w Side Split
ITEM CODE: QDIF04-0N2
Contact us if you have any questions or would like to place an order.
Quick Disconnect Insert With Flange & O-Ring
ITEM CODE: QDIF03-0N2
Both Quick Disconnect Inserts provide a means to attach any Terminal Device with ½” 20 threads to any N-Abler™ Wrist, Wrist Unit and Palmer Unit.
Specifications
Material: 316 Stainless Steel.
Weight: 9 Grams
Length: 11/16”
Width: 5/8”
TD Attach Site: ½” Female Threads
Contact us if you have any questions or would like to place an order.
Quick Disconnect Palmer Unit Backer Plate
ITEM CODE: QDPUBP01-0N2
Contact us if you have any questions or would like to place an order.
Quick Disconnect Palmer Unit
ITEM CODE: QDPU03-0N2
The TAD Quick Disconnect Quick Disconnect Palmer Unit operates like a prosthetic Wrist Unit. It is designed to be attached to the palm area of a custom W.H.O. using the two stainless screws provided. It acts as the platform accepting the N-Abler II™ or the N-Abler IV ™ allowing persons with hand dysfunction or partial hand amputation the opportunity to use any and all of the N-Abler™ custom tools and implements.
Specifications
Material: Body – 7075 Aircraft Aluminum Anodized. 316 Stainless
Steel ball bearing, set screw and spring.
Weight: 32 Grams
Body Length: At Bottom 1 ¼” tapered at the rear at 45° to 11/16” at the Top.
The front face is at 90º.
Body Width: 1 ¼”
Attach Site: Palmer area of Custom or off the shelf W.H.O.