Hosmer QD Insert

ITEM CODE: 51052

Nudge Switch Kit

ITEM CODE: NSK01-0N2

Trans-Carpal Quick Disconnect Adapter

ITEM CODE: TCQDA01-0N2

The TAD Trans-Carpal Quick Disconnect Adapter is designed to be laminated into the palm area of a custom W.H.O. leaving the Colette exposed. The adapter is bendable for custom shaping. Our Quick Disconnect Wrist Unit is then attached to the Trans-Carpal Quick Disconnect Adapter Colette. After proper Wrist orientation is achieved, the Wrist and Colette should be pined with a 1/8” V ¾” SS Roll Pin. This system is designed to accommodate persons with hand dysfunction or partial hand amputation

Specifications
Material: 2024 Aluminum. 316 Stainless Colette screw.
Weight: 19 Grams
Length: 4”
Width: 1 1/8” in th middle tapering to 15/16” on both ends.
Coette Length: 5/8”
Colette Width: 9/16”
Attach Site: Custom Lamination for persons with hand dysfunction or partial
hand amputation.

Custom Quick Disconnect Insert /w Side Split

ITEM CODE: QDIF04-0N2

Quick Disconnect Insert With Flange & O-Ring

ITEM CODE: QDIF03-0N2

Both Quick Disconnect Inserts provide a means to attach any Terminal Device with ½” 20 threads to any N-Abler™ Wrist, Wrist Unit and Palmer Unit.

Specifications
Material: 316 Stainless Steel.
Weight: 9 Grams
Length: 11/16”
Width: 5/8”
TD Attach Site: ½” Female Threads

Quick Disconnect Palmer Unit Backer Plate

ITEM CODE: QDPUBP01-0N2

Quick Disconnect Palmer Unit

ITEM CODE: QDPU03-0N2

The TAD Quick Disconnect Quick Disconnect Palmer Unit operates like a prosthetic Wrist Unit. It is designed to be attached to the palm area of a custom W.H.O. using the two stainless screws provided. It acts as the platform accepting the N-Abler II™ or the N-Abler IV ™ allowing persons with hand dysfunction or partial hand amputation the opportunity to use any and all of the N-Abler™ custom tools and implements.

Specifications
Material: Body – 7075 Aircraft Aluminum Anodized. 316 Stainless
Steel ball bearing, set screw and spring.
Weight: 32 Grams
Body Length: At Bottom 1 ¼” tapered at the rear at 45° to 11/16” at the Top.
The front face is at 90º.
Body Width: 1 ¼”
Attach Site: Palmer area of Custom or off the shelf W.H.O.

Threaded Adapter for Quick Disconnect Wrist Unit

ITEM CODE: TAQDWU05-0N2

Quick Disconnect Wrist Unit

ITEM CODE: QDWU02-0N2

The TAD Quick Disconnect Quick Disconnect Wrist Unit operates like any other Wrist Unit. It is designed for light to medium duty. The Wrist Unit and the Lamination Ring it attaches to is very light and offers an alternative for patients with weight concerns. It can also be used in tandem with our Trans-Carpal Quick Disconnect Adapter to accommodate persons with hand dysfunction or partial hand amputation.

Specifications
Material: Body – 7075 Aircraft Aluminum Anodized. 316 Stainless
Steel ball bearing, set screw and spring.
Weight: 25 Grams
Body Length: 1 ¼”
Body Width: 13/16”
Attach Site: TAD Lamination Ring or Trans-Carpal Quick Disconnect Adapter

Quick Disconnect Myo-Electric Wrist Adapter

ITEM CODE: QDMEWA01-0N2

The Quick Disconnect Myo-Electric Wrist Adapter is designed to allow Myo-Electric users the capability to easily change over to a body powered hook, passive hand, or specialty terminal device such as the N-Abler II ™ terminal device and the entire range of N-Abler II ™ adaptive tools. The Quick Disconnect Myo-Electric Wrist Adapter offers improved radial loading characteristics with 24 locking ball bearings and easy push button operation.

Specifications
Material: Body – 7075 Aircraft Aluminum Hard Anodized. 316 Stainless
Steel ball bearings and locking rings.
Weight: 61 Grams
Body Length: 1 5/16”
Body Width: 1 3/8”
TD Attach Site: ½” Female Threads